Bonding

Z Wikipedie, otevřené encyklopedie.

Bonding slouzi k propojeni vice rozhrani do jednoho, je potreba mit modul bonding. Bondingu je vic druhu, mode=0 pouziva roundrobin (sitovky se stridaji), takze je linka rychla a zaroven funguje i zalohovani jednotlivych spoju.

apt-get install ifenslave

   miimon=

Use integer value for the frequency (in ms) of MII link monitoring. Zero value
is default and means the link monitoring will be disabled. A good value is 100
if you wish to use link monitoring. See HA section for additional info.

/etc/modprobe.d/bond

alias bond0 bonding
options bonding mode=0 miimon=100 

Po zmene konfiguracnich souboru je potreba dat update, aby se jejich zmeny promitly do hlavniho konfiguraku.

update-modules

/etc/network/interfaces

auto bond0
 iface bond0 inet static
 address 10.93.1.210
 netmask 255.255.255.192
 #hwaddress ether 00:02:B3:48:50:2C
 up ifenslave bond0 eth0 eth1
 down ifenslave -d bond0 eth0 eth1

Po novu je to uz fakt uplne easy:

auto bond0
 iface bond0 inet static
 address 10.93.1.210
 netmask 255.255.255.192
 slaves eth0 eth1

Na druhe strane - se to na ciscu nastavi takhle VLAN#Spojovani_portu